1972 Chevy C10 350 Engine Specs
The 1972 Chevy C10 is a classic pickup truck that was equipped with a powerful 350 cubic inch (5.7-liter) V8 engine. This engine, known for its durability and performance, played a significant role in establishing the C10 as a reliable workhorse and a popular choice among truck enthusiasts.
Engine Configuration
The 350 engine featured in the 1972 Chevy C10 was part of Chevrolet’s small-block V8 engine family. It had a displacement of 350 cubic inches, or 5.7 liters, and was built with a cast-iron block and cylinder heads. The engine had a bore of 4.00 inches and a stroke of 3.48 inches, resulting in a compression ratio of 8.5:1.
Equipped with a two-barrel carburetor, the 350 engine produced a respectable amount of power and torque. It had a horsepower rating of approximately 165 horsepower at 3,800 rpm and a torque rating of around 275 lb-ft at 2,400 rpm. These figures may vary depending on the specific configuration and any modifications made to the engine over the years.
Engine Oil Specs & Service Intervals
Proper maintenance and regular oil changes are crucial for keeping the 1972 Chevy C10’s 350 engine running smoothly. Here are the recommended engine oil specifications and service intervals for this classic truck:
| Engine Oil Type | Viscosity | Service Interval |
|---|---|---|
| Conventional Motor Oil | SAE 10W-30 | Every 3,000 miles or 3 months |
| Synthetic Motor Oil | SAE 10W-30 or 5W-30 | Every 5,000 miles or 6 months |
It’s important to note that these service intervals are general recommendations. Depending on factors such as driving conditions, climate, and engine condition, more frequent oil changes may be necessary to maintain optimal performance and protect the engine from premature wear.
When performing an oil change, it’s also essential to replace the oil filter. The oil filter helps remove contaminants from the engine oil, ensuring clean lubrication throughout the system. It is recommended to use a high-quality oil filter that is compatible with the 1972 Chevy C10’s 350 engine.
Additionally, it’s a good practice to regularly check the engine’s oil level and top it up if necessary. This can be done by using the dipstick located on the engine block. The oil level should be within the designated range on the dipstick, neither too low nor overfilled.
By following these engine oil specifications and service intervals, owners of the 1972 Chevy C10 can help prolong the life of their beloved truck and enjoy its reliable performance for years to come.
0 Comments