1996 Chevy S10 2.2 Engine Specs
Engine Configuration
The 1996 Chevy S10 2.2 is equipped with a four-cylinder engine that offers a reliable and efficient performance. Let’s take a closer look at its specifications:
| Engine Type | 2.2-liter Inline-4 |
|---|---|
| Displacement | 2,189 cc |
| Valvetrain | Overhead Valve (OHV) |
| Number of Cylinders | 4 |
| Bore x Stroke | 3.74 in x 3.27 in |
| Compression Ratio | 9.2:1 |
| Fuel System | Sequential Fuel Injection |
| Horsepower | 118 hp @ 5,200 rpm |
| Torque | 140 lb-ft @ 3,600 rpm |
Engine Oil Specs & Service Intervals
Proper engine oil maintenance is crucial to ensure the longevity and optimal performance of your 1996 Chevy S10 2.2 engine. Here are the recommended specifications and service intervals to keep your engine running smoothly:
| Engine Oil Capacity (with filter) | 4.5 quarts |
|---|---|
| Recommended Oil Type | SAE 5W-30 |
| Oil Filter Type | AC Delco PF47 |
| Oil Change Interval | Every 3,000 to 5,000 miles or every 3 months |
Steps to Perform an Engine Oil Change:
Performing regular engine oil changes is a relatively simple task that can be done at home. Here are the steps to follow:
1. Gather the necessary tools and materials: You will need a socket wrench, oil filter wrench, drain pan, new oil filter, and the appropriate amount of SAE 5W-30 engine oil.
2. Park your Chevy S10 on a level surface and engage the parking brake.
3. Locate the oil drain plug underneath the engine. Place the drain pan underneath it.
4. Using the socket wrench, loosen the drain plug and allow the old oil to drain completely into the pan.
5. Once the oil has drained, replace the drain plug and tighten it securely.
6. Locate the oil filter, which is typically located on the side of the engine. Use the oil filter wrench to remove the old oil filter.
7. Before installing the new oil filter, apply a thin layer of fresh oil to the rubber gasket on the top of the filter.
8. Screw the new oil filter onto the engine by hand, ensuring it is tightened securely but not overly tightened.
9. Locate the oil filler cap on the top of the engine and remove it.
10. Pour the appropriate amount of SAE 5W-30 engine oil into the engine through the oil filler hole. Refer to the owner’s manual for the exact amount.
11. Once the oil is filled, replace the oil filler cap.
12. Start the engine and let it run for a few minutes to circulate the new oil.
13. Turn off the engine and check the oil level using the dipstick. Add more oil if necessary.
14. Dispose of the old oil and filter responsibly at a local recycling center or an auto parts store that accepts used oil.
By following these steps and adhering to the recommended service intervals, you can ensure that your 1996 Chevy S10 2.2 engine remains in excellent condition, providing you with reliable performance for years to come.
0 Comments