1978 Dodge 360 Engine Specs
The 1978 Dodge 360 engine is a powerful and reliable V8 engine that was commonly used in various Dodge vehicles during that era. Let’s take a closer look at its specifications and what made it a popular choice among car enthusiasts.
Engine Configuration
The Dodge 360 engine is a V8 engine with a displacement of 5.9 liters (360 cubic inches). It belongs to the LA engine family, which was introduced by Chrysler in the 1960s. The LA engines were known for their durability and performance, and the 360 was no exception.
This engine featured a cast-iron block and cylinder heads, providing excellent strength and heat dissipation. It had a bore of 4.00 inches and a stroke of 3.58 inches, resulting in a relatively square design that contributed to its balanced performance.
Engine Oil Specs & Service Intervals
Proper engine oil is crucial for maintaining the longevity and performance of any engine, including the 1978 Dodge 360. Here are the recommended engine oil specifications and service intervals for this engine:
Engine Oil Specifications:
– Oil Type: The 1978 Dodge 360 engine requires a high-quality motor oil with a viscosity of 10W-40 or 10W-30. It is important to use oil that meets the API (American Petroleum Institute) service classification of SF or SG.
– Oil Capacity: The oil capacity of the Dodge 360 engine is approximately 5 quarts, including the oil filter.
Service Intervals:
– Oil Change Interval: It is recommended to change the engine oil and oil filter every 3,000 miles or every three months, whichever comes first. Regular oil changes help remove contaminants and ensure optimal engine performance.
– Oil Filter Replacement: The oil filter should be replaced during every oil change to maintain proper oil flow and filtration.
Detailed Engine Specifications
To provide a comprehensive overview of the 1978 Dodge 360 engine, let’s take a closer look at its detailed specifications in the following chart:
| Specification | Value |
|---|---|
| Engine Type | V8 |
| Displacement | 5.9 liters (360 cubic inches) |
| Compression Ratio | 8.4:1 |
| Bore | 4.00 inches |
| Stroke | 3.58 inches |
| Valvetrain | Overhead Valve (OHV) |
| Fuel System | 2-barrel or 4-barrel carburetor |
| Horsepower | 155-175 hp |
| Torque | 250-275 lb-ft |
| Recommended Fuel | Regular Unleaded |
| Ignition System | Electronic |
The 1978 Dodge 360 engine offered a balance of power, reliability, and versatility. Its robust construction and solid performance made it a popular choice among Dodge enthusiasts. Whether used in trucks, muscle cars, or other vehicles, the 360 engine provided the necessary power to tackle any road or task.
In conclusion, the 1978 Dodge 360 engine was a formidable V8 engine with a displacement of 5.9 liters. Its durable construction, reliable performance, and recommended oil specifications and service intervals made it a reliable powerhouse for various Dodge vehicles.
0 Comments