2004 Mazda 6 Engine Specs
Engine Configuration
The 2004 Mazda 6 comes equipped with a range of engine options, providing drivers with the power and performance they desire. Let’s take a closer look at the engine configurations available for this model year:
1. 2.3L Inline-4 Engine:
– Displacement: 2.3 liters
– Number of cylinders: 4
– Configuration: Inline
– Fuel type: Gasoline
– Horsepower: 160 hp
– Torque: 155 lb-ft
– Valve train: DOHC (Dual Overhead Camshaft)
– Fuel delivery: Sequential Fuel Injection
2. 3.0L V6 Engine:
– Displacement: 3.0 liters
– Number of cylinders: 6
– Configuration: V6
– Fuel type: Gasoline
– Horsepower: 220 hp
– Torque: 192 lb-ft
– Valve train: DOHC (Dual Overhead Camshaft)
– Fuel delivery: Sequential Fuel Injection
Engine Oil Specs & Service Intervals
Proper engine oil maintenance is crucial to keep your Mazda 6 running smoothly and efficiently. Here are the engine oil specifications and recommended service intervals for the 2004 Mazda 6:
1. Engine Oil Type:
– Recommended oil: API (American Petroleum Institute) certified SAE (Society of Automotive Engineers) 5W-30 or 10W-30 viscosity grade oil.
2. Oil Capacity:
– 2.3L Inline-4 Engine: Approximately 4.2 quarts (including filter)
– 3.0L V6 Engine: Approximately 5.5 quarts (including filter)
3. Oil Change Interval:
– Mazda recommends changing the engine oil every 5,000 miles or every 6 months, whichever comes first. Regular oil changes help maintain optimal engine performance and prolong the life of your vehicle.
4. Oil Filter Replacement:
– It is essential to replace the oil filter during each oil change to ensure proper filtration and prevent contaminants from circulating in the engine. Use a high-quality oil filter that meets or exceeds OEM (Original Equipment Manufacturer) specifications.
5. Oil Change Procedure:
– Here’s a general step-by-step guide to changing the engine oil in your 2004 Mazda 6:
a. Park the vehicle on a level surface and engage the parking brake.
b. Locate the oil drain plug underneath the engine and place a drain pan beneath it.
c. Unscrew the drain plug and allow the old oil to drain completely.
d. Once the oil has drained, replace the drain plug and tighten it securely.
e. Locate the oil filter and remove it using an appropriate oil filter wrench.
f. Apply a thin layer of new oil to the rubber gasket of the new oil filter.
g. Install the new oil filter by hand, ensuring it is tightened according to the manufacturer’s specifications.
h. Refill the engine with the recommended amount of fresh oil using a funnel.
i. Check the oil level using the dipstick and add more oil if necessary.
j. Start the engine and let it run for a few minutes, then check for any leaks.
k. Finally, dispose of the used oil and oil filter properly at a designated recycling center.
By following these engine oil specifications and service intervals, you can help maintain the performance and longevity of your 2004 Mazda 6’s engine. Regular oil changes and proper maintenance are key to ensuring a smooth and reliable driving experience.
0 Comments