2010 Mazda 3 Engine Specs
The 2010 Mazda 3 is a compact car that offers a sporty driving experience and impressive performance. One of the key factors contributing to its performance is its engine. In this article, we will delve into the engine specifications of the 2010 Mazda 3, including its configuration, oil specifications, and service intervals.
Engine Configuration
The 2010 Mazda 3 comes with two engine options: a 2.0-liter inline-4 engine and a 2.5-liter inline-4 engine. Let’s take a closer look at each of these configurations:
1. 2.0-liter Inline-4 Engine:
– Displacement: 2.0 liters
– Number of cylinders: 4
– Valve train: DOHC (Dual Overhead Camshaft)
– Fuel system: Sequential multi-port fuel injection
– Horsepower: 148 hp @ 6,500 rpm
– Torque: 135 lb-ft @ 4,500 rpm
2. 2.5-liter Inline-4 Engine:
– Displacement: 2.5 liters
– Number of cylinders: 4
– Valve train: DOHC (Dual Overhead Camshaft)
– Fuel system: Sequential multi-port fuel injection
– Horsepower: 167 hp @ 6,000 rpm
– Torque: 168 lb-ft @ 4,000 rpm
Engine Oil Specs & Service Intervals
Proper engine maintenance is crucial for the longevity and performance of any vehicle. Let’s take a look at the engine oil specifications and recommended service intervals for the 2010 Mazda 3:
1. Engine Oil Specifications:
– Recommended oil type: SAE 5W-20
– Oil capacity (2.0-liter engine): 4.2 quarts (including filter)
– Oil capacity (2.5-liter engine): 4.4 quarts (including filter)
2. Service Intervals:
– Oil change: Mazda recommends changing the engine oil every 7,500 miles or every 12 months, whichever comes first.
– Oil filter replacement: It is recommended to replace the oil filter during each oil change to ensure optimal engine performance.
It is important to note that these specifications are general guidelines provided by Mazda. However, it is always recommended to consult the owner’s manual or reach out to a certified Mazda dealership for specific information regarding your vehicle’s engine specifications and service intervals.
Detailed Engine Specifications
Below are detailed engine specifications for the 2010 Mazda 3:
| Engine | 2.0-liter Inline-4 | 2.5-liter Inline-4 |
|---|---|---|
| Displacement | 2.0 liters | 2.5 liters |
| Number of Cylinders | 4 | 4 |
| Valve Train | DOHC (Dual Overhead Camshaft) | DOHC (Dual Overhead Camshaft) |
| Fuel System | Sequential multi-port fuel injection | Sequential multi-port fuel injection |
| Horsepower | 148 hp @ 6,500 rpm | 167 hp @ 6,000 rpm |
| Torque | 135 lb-ft @ 4,500 rpm | 168 lb-ft @ 4,000 rpm |
In conclusion, the 2010 Mazda 3 offers two engine options: a 2.0-liter inline-4 engine and a 2.5-liter inline-4 engine. Both engines provide impressive power and performance. It is important to adhere to the recommended engine oil specifications and service intervals to ensure the longevity and optimal performance of your Mazda 3. Always consult the owner’s manual or a certified Mazda dealership for specific information regarding your vehicle’s engine.
0 Comments