Honda D16A9 Engine Specs
The Honda D16A9 engine is a four-cylinder, 1.6-liter engine that was produced by Honda from 1987 to 1991. It was primarily used in the Honda Civic and CRX models during that time. The D16A9 engine is part of Honda’s D-series engine family, known for their reliability and performance.
Engine Configuration
The Honda D16A9 engine features a single overhead camshaft (SOHC) configuration with four valves per cylinder. It utilizes Honda’s Programmed Fuel Injection (PGM-FI) system for efficient fuel delivery. The engine is equipped with an electronic ignition system for optimal spark timing and improved performance.
The D16A9 engine has a displacement of 1,590 cc and a compression ratio of 9.2:1. It produces a maximum power output of 130 horsepower at 6,600 rpm and a peak torque of 116 lb-ft at 5,200 rpm. The engine’s redline is set at 7,200 rpm, allowing for exhilarating high-revving performance.
Engine Oil Specs & Service Intervals
Proper engine oil selection and regular maintenance are crucial for the longevity and performance of the Honda D16A9 engine. Here are the recommended engine oil specifications and service intervals for this engine:
- Engine Oil Type: It is recommended to use a high-quality, synthetic 5W-30 engine oil that meets the API (American Petroleum Institute) service classification of SJ or higher.
- Oil Capacity: The D16A9 engine requires approximately 3.6 liters (3.8 quarts) of engine oil when performing an oil change.
- Oil Filter Replacement: It is important to replace the oil filter during each oil change to ensure proper filtration and prevent contaminants from circulating in the engine.
- Service Intervals: Honda recommends changing the engine oil and oil filter every 7,500 miles or 12 months, whichever comes first. However, it is always a good practice to consult the owner’s manual for the specific service intervals recommended by Honda for your vehicle.
Regular oil changes and filter replacements help maintain optimal engine performance, lubrication, and protection against wear and tear. It is also essential to check the engine oil level regularly and top it up if necessary, following the manufacturer’s guidelines.
Detailed Engine Specifications
For a comprehensive overview of the Honda D16A9 engine specifications, refer to the following chart:
| Engine Specifications | Value |
|---|---|
| Engine Type | Inline 4-cylinder |
| Displacement | 1,590 cc |
| Valvetrain | SOHC, 4 valves per cylinder |
| Compression Ratio | 9.2:1 |
| Maximum Power Output | 130 hp @ 6,600 rpm |
| Peak Torque | 116 lb-ft @ 5,200 rpm |
| Redline | 7,200 rpm |
| Fuel System | Programmed Fuel Injection (PGM-FI) |
| Ignition System | Electronic Ignition |
In conclusion, the Honda D16A9 engine is a reliable and performance-oriented powerplant that offers a balance of power and efficiency. By following the recommended engine oil specifications and service intervals, you can ensure the longevity and optimal performance of this engine. Regular maintenance and care will help you enjoy the full potential of your Honda vehicle equipped with the D16A9 engine.
0 Comments