2009 Mitsubishi Lancer Engine Specs
The 2009 Mitsubishi Lancer is a popular compact car known for its sporty design and reliable performance. One of the key factors contributing to its performance is its engine. Let’s take a closer look at the engine specifications of the 2009 Mitsubishi Lancer.
Engine Configuration
The 2009 Mitsubishi Lancer comes with two engine options: a 2.0-liter inline-4 engine and a more powerful 2.4-liter inline-4 engine. Both engines are designed to deliver a balance of power and efficiency.
- 2.0-liter Inline-4 Engine:
- Displacement: 2.0 liters
- Configuration: Inline-4
- Horsepower: 152 hp
- Torque: 146 lb-ft
- 2.4-liter Inline-4 Engine:
- Displacement: 2.4 liters
- Configuration: Inline-4
- Horsepower: 168 hp
- Torque: 167 lb-ft
Both engines are equipped with Mitsubishi’s MIVEC (Mitsubishi Innovative Valve timing Electronic Control) technology, which optimizes valve timing for improved performance and fuel efficiency.
Engine Oil Specs & Service Intervals
Proper engine oil maintenance is crucial for the longevity and performance of any vehicle, including the 2009 Mitsubishi Lancer. Here are the engine oil specifications and recommended service intervals for the 2009 Lancer:
| Engine | Engine Oil Capacity | Recommended Oil Type | Service Interval |
|---|---|---|---|
| 2.0-liter Inline-4 Engine | 4.2 quarts | 5W-30 or 10W-30 | Every 7,500 miles or 12 months |
| 2.4-liter Inline-4 Engine | 4.2 quarts | 5W-30 or 10W-30 | Every 7,500 miles or 12 months |
It is important to use the recommended oil type and adhere to the specified service intervals to ensure optimal engine performance and longevity. Regular oil changes help maintain proper lubrication, cooling, and protection against engine wear.
In addition to regular oil changes, it is also essential to check the engine oil level regularly and top it up if necessary. This can be done by following these simple steps:
- Park the vehicle on a level surface and turn off the engine.
- Locate the engine oil dipstick, usually marked with a bright-colored handle.
- Remove the dipstick, wipe it clean with a cloth, and reinsert it fully.
- Remove the dipstick again and check the oil level. It should be between the minimum and maximum marks on the dipstick.
- If the oil level is below the minimum mark, add the recommended oil type gradually while checking the level until it reaches the desired range.
- Reinsert the dipstick securely and ensure it is properly seated.
By following these engine oil specifications, service intervals, and maintenance procedures, you can keep your 2009 Mitsubishi Lancer’s engine running smoothly and efficiently for years to come.
0 Comments