1993 Ford 302 Engine Specs
The 1993 Ford 302 engine, also known as the 5.0L V8 engine, was a popular choice for many Ford vehicles during that time. It offered a balance of power, reliability, and fuel efficiency. Let’s take a closer look at its specifications and features.
Engine Configuration
- Engine Type: V8
- Displacement: 5.0 liters (302 cubic inches)
- Fuel System: Sequential Multi-Port Fuel Injection
- Valvetrain: Overhead Valve (OHV)
- Compression Ratio: 9.0:1
- Bore x Stroke: 4.0 inches x 3.0 inches
- Horsepower: 205 hp @ 4200 rpm
- Torque: 275 lb-ft @ 3200 rpm
The 1993 Ford 302 engine featured a V8 configuration, meaning it had eight cylinders arranged in a V shape. This design allowed for smooth power delivery and balanced performance. With a displacement of 5.0 liters or 302 cubic inches, it provided ample power for a variety of applications.
The engine utilized Sequential Multi-Port Fuel Injection, which ensured precise fuel delivery to each cylinder for optimal performance and fuel efficiency. The valvetrain was based on an Overhead Valve (OHV) design, where the valves were located in the engine block, operated by pushrods and rocker arms. This design offered a good balance between performance and simplicity.
The compression ratio of the 1993 Ford 302 engine was 9.0:1. This ratio determines the amount of compression that occurs in the cylinders during the combustion process. A higher compression ratio generally leads to increased power output, but it also requires higher-octane fuel to prevent knocking.
The bore and stroke of the engine were 4.0 inches and 3.0 inches, respectively. The bore refers to the diameter of the cylinder, while the stroke represents the distance the piston travels inside the cylinder. These measurements determine the engine’s displacement and, in turn, its power output.
The 1993 Ford 302 engine produced 205 horsepower at 4200 rpm and 275 lb-ft of torque at 3200 rpm. These figures indicate the engine’s ability to deliver power and rotational force, which are crucial for acceleration and towing capabilities.
Engine Oil Specs & Service Intervals
Proper engine oil selection and regular maintenance are essential for the longevity and performance of any engine, including the 1993 Ford 302. Here are the recommended engine oil specifications and service intervals for this engine:
- Engine Oil Type: SAE 5W-30
- Oil Capacity (with filter change): 5 quarts
- Oil Change Interval: Every 3,000 to 5,000 miles or every 3 months
- Oil Filter: Recommended to use a high-quality, OEM or equivalent oil filter
The 1993 Ford 302 engine requires SAE 5W-30 oil for optimal lubrication and protection. This oil viscosity provides good performance in both cold and hot weather conditions. It is important to use high-quality oil that meets the manufacturer’s specifications to ensure proper lubrication and minimize engine wear.
When performing an oil change, it is recommended to replace the oil filter as well. The oil capacity of the 1993 Ford 302 engine, including the filter change, is approximately 5 quarts. However, it is always advisable to consult the owner’s manual or check with a trusted mechanic for the exact oil capacity of your specific vehicle.
As for the service intervals, it is generally recommended to change the engine oil every 3,000 to 5,000 miles or every 3 months, whichever comes first. Regular oil changes help remove contaminants and maintain proper lubrication, ensuring the engine operates smoothly and efficiently.
Remember, following the manufacturer’s recommended engine oil specs and service intervals is crucial for the overall health and performance of your 1993 Ford 302 engine.
| Engine Specifications | Value |
|---|---|
| Engine Type | V8 |
| Displacement | 5.0 liters (302 cubic inches) |
| Fuel System | Sequential Multi-Port Fuel Injection |
| Valvetrain | Overhead Valve (OHV) |
| Compression Ratio | 9.0:1 |
| Bore x Stroke | 4.0 inches x 3.0 inches |
| Horsepower | 205 hp @ 4200 rpm |
| Torque | 275 lb-ft @ 3200 rpm |
0 Comments