2006 BMW 530i Engine Specifications
The 2006 BMW 530i is part of the E60 generation of the 5 Series, which is known for its blend of performance, luxury, and advanced technology. The engine specifications of the 530i reflect BMW’s commitment to engineering excellence, providing a robust performance profile that appeals to driving enthusiasts.
Engine Overview
The 2006 BMW 530i is equipped with a 3.0-liter inline-six engine, known for its smooth operation and responsive power delivery. Below are the detailed specifications for the engine:
Specification | Details |
---|---|
Engine Type | Inline-6 |
Displacement | 3.0 liters (183 cubic inches) |
Power Output | 255 horsepower at 6,600 RPM |
Torque | 220 lb-ft at 2,750 RPM |
Compression Ratio | 10.2:1 |
Fuel System | Electronic Fuel Injection |
Fuel Type | Premium unleaded (91 octane or higher) |
Transmission Options | 6-speed manual or 6-speed automatic |
Drivetrain | Rear-wheel drive (RWD) |
Engine Configuration
The engine configuration of the 2006 BMW 530i is designed to provide a balance of performance and efficiency. The inline-six layout is favored for its smoothness and ability to deliver power evenly across the RPM range.
Key Features of the Engine Configuration
– Inline-6 Design: This configuration allows for a more compact engine while maintaining a smooth power delivery.
– Aluminum Block and Head: Reduces weight and enhances thermal efficiency.
– Double Vanos Technology: Variable valve timing system that optimizes performance and fuel efficiency across different RPM ranges.
– DOHC (Dual Overhead Camshafts): Provides better airflow and performance at higher RPMs.
Engine Oil Specifications
Proper engine oil is crucial for the longevity and performance of the BMW 530i’s engine. The specifications for engine oil are as follows:
Recommended Engine Oil
– Oil Type: Synthetic motor oil
– Viscosity: SAE 5W-30 or SAE 0W-40
– Oil Capacity: Approximately 6.5 quarts (with filter change)
Oil Change Intervals
Regular oil changes are essential for maintaining engine health. The recommended service intervals for the 2006 BMW 530i are:
– Standard Oil Change Interval: Every 7,500 miles or 12 months, whichever comes first.
– Severe Driving Conditions: If driving in extreme temperatures, heavy traffic, or towing, consider changing oil every 5,000 miles.
Service Intervals
Maintaining the 2006 BMW 530i involves adhering to specific service intervals to ensure optimal performance and reliability.
General Maintenance Schedule
The following is a general maintenance schedule for the 2006 BMW 530i:
- Every 15,000 miles:
- Inspect brake pads and discs
- Check and replace air filter if necessary
- Inspect tires for wear and rotation
- Every 30,000 miles:
- Replace cabin air filter
- Inspect and replace spark plugs if necessary
- Flush and replace coolant
- Every 60,000 miles:
- Replace transmission fluid and filter
- Inspect fuel system
- Check suspension components
- Every 100,000 miles:
- Inspect and replace timing belt (if applicable)
- Perform a comprehensive engine diagnostic
- Check and replace differential fluid
Conclusion
The 2006 BMW 530i stands out in the luxury sedan market, thanks to its powerful inline-six engine, advanced technology, and commitment to performance. Understanding the engine specifications, configuration, oil requirements, and service intervals is essential for any owner looking to maintain their vehicle in optimal condition. Regular maintenance not only enhances the driving experience but also prolongs the life of the engine, ensuring that the 530i continues to deliver the performance and luxury that BMW is known for.
0 Comments