2014 BMW 328i Engine Specifications
The 2014 BMW 328i is a part of the sixth generation of the BMW 3 Series, known for its blend of performance, luxury, and technology. The engine specifications of the 328i are a crucial aspect of its appeal, providing a balance between power and efficiency.
Engine Overview
The 2014 BMW 328i is equipped with a 2.0-liter inline-4 engine, known as the N20. This engine features turbocharging, which enhances its performance while maintaining fuel efficiency.
Detailed Engine Specifications
| Specification | Details |
|---|---|
| Engine Type | 2.0L Inline-4 Turbocharged |
| Displacement | 1998 cc |
| Power Output | 240 hp @ 5,000 – 6,000 rpm |
| Torque | 255 lb-ft @ 1,250 – 4,800 rpm |
| Compression Ratio | 10.2:1 |
| Fuel System | Direct Injection |
| Fuel Type | Premium Unleaded |
| Transmission | 8-Speed Automatic |
| Drivetrain | Rear-Wheel Drive (RWD) or All-Wheel Drive (xDrive) |
| 0-60 mph | 5.7 seconds (RWD) |
| Top Speed | 130 mph (electronically limited) |
Engine Configuration
The engine configuration of the 2014 BMW 328i is designed for optimal performance and efficiency. The inline-4 layout is compact, allowing for a lighter engine that contributes to the vehicle’s overall agility.
Key Features of the Engine Configuration
- Turbocharging: The turbocharger increases air intake, allowing for more power without a significant increase in engine size.
- Direct Injection: This technology improves fuel efficiency and reduces emissions by delivering fuel directly into the combustion chamber.
- Variable Valve Timing: The engine uses BMW’s Valvetronic system, which adjusts the lift of the intake valves for better performance and efficiency.
- Lightweight Design: The engine’s aluminum construction reduces weight, enhancing the vehicle’s handling and fuel economy.
Engine Oil Specifications
Proper maintenance of the engine oil is essential for the longevity and performance of the 2014 BMW 328i. The right oil type and service intervals ensure that the engine runs smoothly and efficiently.
Recommended Engine Oil
The recommended engine oil for the 2014 BMW 328i is synthetic oil, which provides better protection and performance under various driving conditions.
- Oil Type: Synthetic Oil
- Viscosity Rating: 0W-30 or 5W-30
- Oil Capacity: Approximately 5.5 quarts (with filter)
Oil Change Intervals
The oil change intervals for the 2014 BMW 328i can vary based on driving conditions and habits. However, the general recommendations are as follows:
- Every 10,000 miles or 12 months, whichever comes first.
- For severe driving conditions (frequent short trips, extreme temperatures, towing), consider changing the oil every 5,000 to 7,500 miles.
Service Intervals
Regular service intervals are crucial for maintaining the performance and reliability of the 2014 BMW 328i. Following the manufacturer’s recommendations helps prevent potential issues and ensures the vehicle operates at its best.
General Service Schedule
The following is a general service schedule for the 2014 BMW 328i:
- Every 10,000 miles:
- Oil and filter change
- Brake fluid replacement
- Check tire condition and pressure
- Inspect wiper blades and replace if necessary
- Every 20,000 miles:
- Replace air filter
- Inspect and replace cabin air filter
- Check and adjust drive belts
- Every 30,000 miles:
- Inspect brake pads and rotors
- Check suspension components
- Inspect exhaust system
- Every 60,000 miles:
- Replace spark plugs
- Inspect fuel system
- Check transmission fluid
Conclusion
The 2014 BMW 328i is a well-rounded vehicle that combines performance, luxury, and efficiency. Understanding its engine specifications, configuration, oil requirements, and service intervals is essential for maintaining its performance and longevity. Regular maintenance and adherence to recommended service schedules will ensure that the 328i continues to deliver an enjoyable driving experience for years to come.
0 Comments