BMW E39 528i Engine Specifications
The BMW E39 528i is a part of the fifth generation of the BMW 5 Series, produced from 1995 to 2003. This model is known for its blend of performance, luxury, and reliability. The engine specifications play a crucial role in defining the driving experience of this vehicle. Below are the detailed specifications for the E39 528i engine.
Specification | Details |
---|---|
Engine Type | Inline 6-cylinder |
Displacement | 2.8 liters (2793 cc) |
Bore x Stroke | 82.0 mm x 75.0 mm |
Compression Ratio | 10.0:1 |
Maximum Power | 193 hp (143 kW) at 5,300 rpm |
Maximum Torque | 206 lb-ft (280 Nm) at 3,500 rpm |
Fuel System | Electronic fuel injection |
Fuel Type | Premium unleaded gasoline |
Transmission Options | 5-speed manual, 5-speed automatic |
Drive Type | Rear-wheel drive (RWD) |
Engine Configuration
The engine configuration of the BMW E39 528i is designed to provide a balance of performance and efficiency. Here are some key aspects of the engine configuration:
Engine Layout
– Inline 6-cylinder configuration
– Smooth power delivery and refined operation
– Low center of gravity contributing to better handling
Performance Characteristics
– The engine is capable of accelerating from 0 to 60 mph in approximately 7.0 seconds.
– Top speed is electronically limited to around 140 mph.
– The engine’s design allows for a good blend of power and fuel efficiency.
Engine Components
– DOHC (Dual Overhead Camshaft) design for improved airflow and performance.
– Variable valve timing (VANOS) enhances efficiency and power across the RPM range.
– Lightweight aluminum construction reduces overall weight and improves handling.
Engine Oil Specifications
Proper engine oil selection is crucial for maintaining the performance and longevity of the BMW E39 528i engine. Below are the recommended engine oil specifications:
Oil Type
– Synthetic oil is recommended for optimal performance.
– Viscosity grade: 5W-30 or 10W-40, depending on climate and driving conditions.
Oil Capacity
– The total oil capacity, including the oil filter, is approximately 6.5 quarts (6.2 liters).
Oil Change Intervals
– It is recommended to change the engine oil every 7,500 miles (12,000 km) or every 12 months, whichever comes first.
– For severe driving conditions (e.g., frequent short trips, towing, or extreme temperatures), consider changing the oil every 5,000 miles (8,000 km).
Service Intervals
Regular maintenance is essential for keeping the BMW E39 528i running smoothly. Below is a breakdown of the recommended service intervals:
General Maintenance Schedule
– Every 15,000 miles (24,000 km):
– Oil and oil filter change
– Air filter replacement
– Cabin air filter replacement
– Every 30,000 miles (48,000 km):
– Fuel filter replacement
– Spark plug replacement (if not replaced earlier)
– Every 60,000 miles (96,000 km):
– Transmission fluid and filter change
– Brake fluid replacement
– Coolant replacement
– Every 100,000 miles (160,000 km):
– Timing belt replacement (if applicable)
– Inspect suspension components and replace as necessary
Additional Considerations
– Regularly check and maintain tire pressure and tread depth.
– Inspect brake pads and rotors for wear.
– Monitor fluid levels (coolant, brake fluid, power steering fluid) and top off as needed.
Conclusion
The BMW E39 528i is a well-rounded vehicle that offers a blend of performance, comfort, and reliability. Understanding the engine specifications, configuration, oil requirements, and service intervals is essential for maintaining the vehicle’s performance over time. Regular maintenance and proper care will ensure that the E39 528i continues to deliver an enjoyable driving experience for years to come.
0 Comments