1962 Chevy 235 Engine Specs
Engine Configuration
The 1962 Chevy 235 engine was a six-cylinder, overhead valve (OHV) engine with a displacement of 235.5 cubic inches. It featured a cast-iron block and cylinder head, providing durability and strength. This engine was commonly found in Chevrolet vehicles during the early 1960s.
Engine Oil Specs & Service Intervals
Proper engine oil is essential for the smooth operation and longevity of any engine, including the 1962 Chevy 235. Here are the recommended engine oil specifications and service intervals for this engine:
Engine Oil Specifications
To ensure optimal performance and protection for your 1962 Chevy 235 engine, it is important to use the right type of engine oil. The recommended oil specifications for this engine are as follows:
– Oil Type: SAE 30 or SAE 10W-30
– API Service Classification: SG (or higher)
– Oil Capacity: Approximately 4-5 quarts
Using the correct oil type and meeting the API service classification ensures that the engine is adequately lubricated and protected against wear and tear.
Service Intervals
Regular maintenance is crucial to keep your 1962 Chevy 235 engine running smoothly. Here are the recommended service intervals for engine oil changes:
– Normal Driving Conditions: Change the engine oil every 3,000 miles or every three months, whichever comes first.
– Severe Driving Conditions: If you frequently drive in severe conditions such as extreme temperatures, dusty environments, or towing heavy loads, it is recommended to change the engine oil every 1,000-2,000 miles or every three months, whichever comes first.
It is important to note that these service intervals are general recommendations. Always refer to your vehicle’s owner’s manual for the manufacturer’s specific guidelines and recommendations.
Detailed Engine Specifications
| Engine Type | Inline 6-cylinder |
|---|---|
| Displacement | 235.5 cubic inches |
| Engine Block Material | Cast Iron |
| Cylinder Head Material | Cast Iron |
| Valvetrain | Overhead Valve (OHV) |
| Fuel System | Single-barrel Carburetor |
| Horsepower | 130 HP @ 4,000 RPM |
| Torque | 210 lb-ft @ 2,000 RPM |
| Compression Ratio | 8.0:1 |
| Firing Order | 1-5-3-6-2-4 |
These detailed engine specifications provide a comprehensive overview of the 1962 Chevy 235 engine. It is important to have a good understanding of these specifications to properly maintain and care for your vehicle’s engine.
In conclusion, the 1962 Chevy 235 engine was a reliable and durable six-cylinder engine commonly found in Chevrolet vehicles during that era. By following the recommended engine oil specifications and service intervals, you can ensure the longevity and optimal performance of your engine. Regular maintenance and proper care are key to keeping your 1962 Chevy 235 engine running smoothly for years to come.
0 Comments