1969 Chevy 396 Engine Specs
Engine Configuration
The 1969 Chevy 396 engine was a powerful V8 engine that was widely used in various Chevrolet vehicles during that era. It featured a displacement of 396 cubic inches, or 6.5 liters, and was part of the Mark IV big-block engine family. This engine was known for its impressive performance and durability, making it a popular choice among car enthusiasts.
Engine Oil Specs & Service Intervals
Proper maintenance and regular oil changes are crucial for the longevity and optimal performance of any engine, including the 1969 Chevy 396. Here are the engine oil specifications and recommended service intervals for this classic engine:
| Engine Oil Specifications | Service Intervals |
|---|---|
| Oil Type | 10W-30 or 10W-40 |
| Oil Capacity (with filter) | 5 quarts |
| Oil Capacity (without filter) | 4.5 quarts |
| Oil Filter | AC Delco PF25 or equivalent |
| Oil Change Interval | Every 3,000 to 5,000 miles or every 3 months |
Recommended Service Steps
To ensure the proper maintenance of your 1969 Chevy 396 engine, follow these steps for an oil change:
1. Prepare the necessary tools and materials, including a new oil filter, the appropriate amount of engine oil, a drain pan, a socket wrench, and a funnel.
2. Park your vehicle on a level surface and engage the parking brake.
3. Locate the oil drain plug on the bottom of the engine oil pan.
4. Place the drain pan beneath the drain plug.
5. Unscrew the drain plug using a socket wrench and allow the old oil to fully drain into the pan.
6. Once the oil has completely drained, replace the drain plug and tighten it securely.
7. Locate the oil filter, which is typically located on the side of the engine.
8. Using an oil filter wrench, carefully remove the old oil filter.
9. Before installing the new oil filter, apply a thin layer of fresh oil to the rubber gasket.
10. Screw on the new oil filter by hand, ensuring it is tightened securely.
11. Locate the oil filler cap on the top of the engine and remove it.
12. Insert a funnel into the oil filler hole and pour the recommended amount of engine oil into the engine.
13. Replace the oil filler cap.
14. Start the engine and let it run for a few minutes to circulate the new oil.
15. Turn off the engine and check the oil level using the dipstick. Add more oil if necessary.
16. Dispose of the used oil and oil filter properly at a recycling center.
By following these recommended service steps and adhering to the specified oil specifications and service intervals, you can ensure that your 1969 Chevy 396 engine remains in excellent condition for years to come. Regular oil changes and proper maintenance are essential for preserving the performance and longevity of this classic engine.
0 Comments