1970 Chevy Truck 350 Engine Specs

Engine Configuration

The 1970 Chevy Truck 350 engine is a V8 engine that belongs to the small-block Chevrolet engine family. It features a displacement of 5.7 liters or 350 cubic inches, hence its name. This engine was widely used in various Chevrolet vehicles during the 1970s, including trucks, sedans, and muscle cars.

The 350 engine has a bore and stroke of 4.00 x 3.48 inches, which provides a balanced combination of power and torque. It utilizes a cast-iron block and cylinder heads, ensuring durability and longevity. The engine’s compression ratio is 9.0:1, allowing it to run on regular unleaded gasoline.

Engine Oil Specs & Service Intervals

Proper engine oil specifications and regular maintenance are crucial for the optimal performance and longevity of the 1970 Chevy Truck 350 engine. Here are the recommended engine oil specifications and service intervals:

1. Engine Oil Type: It is recommended to use a high-quality engine oil with a viscosity of 10W-30 or 10W-40. This ensures proper lubrication and protection for the engine components.

2. Oil Capacity: The 1970 Chevy Truck 350 engine has an oil capacity of approximately 5 quarts, including the oil filter.

3. Oil Filter: Always use a high-quality oil filter that is compatible with the 350 engine. This helps to remove impurities and contaminants from the oil, ensuring cleaner oil circulation.

4. Service Intervals: It is recommended to change the engine oil and oil filter every 3,000 miles or every three months, whichever comes first. Regular oil changes help maintain engine performance and prevent premature wear.

5. Oil Change Procedure: To change the engine oil, follow these steps:
– Warm up the engine to operating temperature.
– Place a drain pan beneath the oil pan.
– Remove the oil drain plug and allow the oil to drain completely.
– Replace the drain plug and tighten it securely.
– Remove the old oil filter and replace it with a new one.
– Add the recommended amount of fresh engine oil through the oil filler cap.
– Check the oil level using the dipstick and adjust if necessary.
– Dispose of the used oil and filter properly.

Detailed Engine Specifications

Engine Type V8
Displacement 5.7 liters (350 cubic inches)
Bore x Stroke 4.00 x 3.48 inches
Compression Ratio 9.0:1
Block Material Cast Iron
Cylinder Head Material Cast Iron
Recommended Oil Viscosity 10W-30 or 10W-40
Oil Capacity Approximately 5 quarts (including filter)
Recommended Oil Change Interval Every 3,000 miles or three months

In conclusion, the 1970 Chevy Truck 350 engine is a reliable and powerful V8 engine that offers a balance of performance and durability. By following the recommended engine oil specifications and service intervals, you can ensure the longevity and optimal performance of this iconic engine. Regular maintenance and proper lubrication are key to keeping your Chevy Truck running smoothly for years to come.

Categories: 5.7Chevrolet

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *