2004 Chevy Silverado Engine Specs
Engine Configuration
The 2004 Chevy Silverado offers a range of engine options to suit different driving needs and preferences. Here are the engine configurations available for this model:
1. 4.3L V6 Engine:
– Displacement: 4.3 liters
– Cylinder Configuration: V6
– Horsepower: 200 hp
– Torque: 260 lb-ft
– Fuel Type: Gasoline
2. 4.8L V8 Engine:
– Displacement: 4.8 liters
– Cylinder Configuration: V8
– Horsepower: 285 hp
– Torque: 295 lb-ft
– Fuel Type: Gasoline
3. 5.3L V8 Engine:
– Displacement: 5.3 liters
– Cylinder Configuration: V8
– Horsepower: 295-310 hp (depending on specific model)
– Torque: 335-335 lb-ft (depending on specific model)
– Fuel Type: Gasoline
4. 6.0L V8 Engine:
– Displacement: 6.0 liters
– Cylinder Configuration: V8
– Horsepower: 300-345 hp (depending on specific model)
– Torque: 360-380 lb-ft (depending on specific model)
– Fuel Type: Gasoline
Engine Oil Specs & Service Intervals
Proper engine oil maintenance is crucial for the longevity and performance of your 2004 Chevy Silverado. Here are the recommended engine oil specifications and service intervals:
1. Engine Oil Type:
– The recommended engine oil for the 2004 Chevy Silverado is API-certified SAE 5W-30 oil. It is important to use oil that meets this specification to ensure optimal engine performance.
2. Oil Capacity:
– The oil capacity for the 2004 Chevy Silverado varies depending on the engine configuration. Here are the approximate oil capacities for each engine type:
– 4.3L V6 Engine: 4.5 quarts (with filter)
– 4.8L V8 Engine: 6 quarts (with filter)
– 5.3L V8 Engine: 6 quarts (with filter)
– 6.0L V8 Engine: 6 quarts (with filter)
3. Service Intervals:
– It is recommended to change the engine oil and oil filter every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first. Regular oil changes help maintain engine cleanliness and lubrication.
4. Oil Filter Replacement:
– When performing an oil change, it is important to replace the oil filter as well. A new oil filter ensures proper filtration of contaminants and helps maintain oil quality.
5. Oil Change Procedure:
– To change the engine oil on your 2004 Chevy Silverado, follow these steps:
1. Park the vehicle on a level surface and engage the parking brake.
2. Locate the oil drain plug underneath the engine and place a drain pan beneath it.
3. Remove the drain plug and allow the old oil to drain completely.
4. Once drained, reinstall the drain plug and tighten it to the recommended torque specification.
5. Locate the oil filter and use an oil filter wrench to remove it.
6. Apply a thin layer of new oil to the rubber gasket of the new oil filter.
7. Install the new oil filter and tighten it by hand until snug.
8. Refill the engine with the recommended amount of new oil.
9. Start the engine and check for any leaks.
10. Turn off the engine and wait a few minutes for the oil to settle. Check the oil level using the dipstick and add more if necessary.
11. Dispose of the used oil and oil filter at a certified recycling center.
By following these engine oil specifications and service intervals, you can ensure that your 2004 Chevy Silverado’s engine remains in optimal condition, providing reliable performance for years to come.
0 Comments