Dodge Avenger Engine Specifications
The Dodge Avenger, a mid-size sedan produced by Chrysler, has garnered attention for its blend of performance and practicality. Over its production run from 2007 to 2014, the Avenger was equipped with various engine options, each offering distinct characteristics. Below is a detailed overview of the engine specifications for the Dodge Avenger.
Engine Options Overview
The Dodge Avenger was available with several engine configurations, catering to different performance needs and preferences. The most common engines found in the Avenger include:
| Engine Type | Displacement | Cylinders | Horsepower | Torque | Fuel Type |
|---|---|---|---|---|---|
| 2.4L I4 | 2.4 liters | 4 | 173 hp | 166 lb-ft | Regular Unleaded |
| 3.5L V6 | 3.5 liters | 6 | 283 hp | 260 lb-ft | Premium Unleaded |
| 2.0L Turbo I4 | 2.0 liters | 4 | 200 hp | 207 lb-ft | Regular Unleaded |
Engine Configuration
The engine configuration of the Dodge Avenger plays a crucial role in its performance and efficiency. Each engine option is designed to provide a balance between power and fuel economy.
2.4L I4 Engine
– Configuration : Inline-4
– Fuel System : Multi-Point Fuel Injection
– Compression Ratio : 9.8:1
– Bore x Stroke : 88 mm x 97 mm
– Valvetrain : DOHC, 16 valves
This engine is known for its reliability and decent fuel economy, making it a popular choice for everyday driving.
3.5L V6 Engine
– Configuration : V6
– Fuel System : Multi-Point Fuel Injection
– Compression Ratio : 10.3:1
– Bore x Stroke : 89 mm x 92 mm
– Valvetrain : DOHC, 24 valves
The V6 engine offers a more spirited driving experience with increased horsepower and torque, appealing to those seeking a sportier ride.
2.0L Turbo I4 Engine
– Configuration : Inline-4
– Fuel System : Turbocharged Direct Injection
– Compression Ratio : 10.0:1
– Bore x Stroke : 85 mm x 88 mm
– Valvetrain : DOHC, 16 valves
This turbocharged engine provides a balance of power and efficiency, making it an attractive option for performance enthusiasts.
Engine Oil Specifications
Proper engine maintenance is essential for the longevity and performance of the Dodge Avenger. One of the critical aspects of maintenance is using the right engine oil.
Recommended Engine Oil
– Viscosity : SAE 5W-20
– Type : Synthetic Blend or Full Synthetic
– Capacity :
– 2.4L I4: 5 quarts
– 3.5L V6: 6 quarts
– 2.0L Turbo I4: 5 quarts
Using the recommended oil type and viscosity ensures optimal engine performance and protection against wear.
Oil Change Intervals
Regular oil changes are crucial for maintaining engine health. The recommended oil change intervals for the Dodge Avenger are as follows:
– Every 5,000 to 7,500 miles or every 6 months, whichever comes first, for conventional oil.
– Every 7,500 to 10,000 miles or every 12 months, whichever comes first, for synthetic oil.
Service Intervals
In addition to oil changes, the Dodge Avenger requires regular maintenance checks to ensure all components are functioning correctly.
Regular Maintenance Schedule
– Every 3,000 to 5,000 miles :
– Check and replace engine oil and filter
– Inspect tire pressure and tread depth
– Check fluid levels (brake, coolant, transmission)
– Every 15,000 miles :
– Replace air filter
– Inspect brake pads and rotors
– Check battery condition
– Every 30,000 miles :
– Replace fuel filter
– Inspect and replace spark plugs
– Flush and replace coolant
– Every 60,000 miles :
– Inspect timing belt (if applicable)
– Replace transmission fluid
– Inspect suspension components
Conclusion
The Dodge Avenger offers a range of engine options, each designed to meet different driving needs. Understanding the engine specifications, oil requirements, and service intervals is essential for maintaining the vehicle’s performance and longevity. Regular maintenance not only enhances the driving experience but also ensures safety and reliability on the road.
0 Comments