1962 Ford 406 Engine Specs
The 1962 Ford 406 engine was a high-performance V8 engine produced by Ford Motor Company. It was part of the FE series of engines, which were known for their power and durability. The 406 engine was specifically designed for performance-oriented applications, making it a popular choice among car enthusiasts and racers during that era.
Engine Configuration
The Ford 406 engine featured a V8 configuration, meaning it had eight cylinders arranged in a V-shaped pattern. It had a displacement of 406 cubic inches, or approximately 6.7 liters. The engine block was made of cast iron, providing strength and stability. The cylinder heads were also made of cast iron and featured large ports and valves for improved airflow.
The 406 engine utilized a single four-barrel carburetor to deliver fuel and air mixture to the combustion chambers. This carburetor, combined with the engine’s high compression ratio, contributed to its impressive power output.
Engine Oil Specs & Service Intervals
Proper engine oil is crucial for maintaining the performance and longevity of any engine, including the Ford 406. While specific oil recommendations may vary depending on factors such as climate and driving conditions, here are some general guidelines:
- Oil Type: It is recommended to use a high-quality, multi-viscosity engine oil with a viscosity rating of 10W-30 or 10W-40. This ensures proper lubrication and protection for the engine components.
- Oil Capacity: The Ford 406 engine typically had an oil capacity of around 5 quarts, including the oil filter.
- Oil Change Interval: Regular oil changes are essential to keep the engine running smoothly. It is generally recommended to change the oil every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first.
- Oil Filter Replacement: Along with oil changes, it is important to replace the oil filter. This helps remove contaminants and debris from the oil, ensuring its cleanliness. The oil filter should be replaced during each oil change.
It is worth noting that these recommendations are general guidelines, and it is always best to consult the vehicle’s owner’s manual or a trusted mechanic for specific oil specifications and service intervals for your particular Ford 406 engine.
Detailed Engine Specifications
| Engine Type | V8 |
|---|---|
| Displacement | 406 cubic inches (6.7 liters) |
| Compression Ratio | 10.5:1 |
| Carburetor | Single four-barrel |
| Power Output | Approximately 385 horsepower |
| Torque | Approximately 440 lb-ft |
| Engine Block Material | Cast iron |
| Cylinder Head Material | Cast iron |
The 1962 Ford 406 engine was a formidable powerplant, delivering impressive horsepower and torque. Its V8 configuration, combined with its high-performance design, made it a sought-after engine for both street and racing applications. Proper maintenance, including regular oil changes and using the recommended oil type, is essential to keep the engine running at its best.
0 Comments