1966 Ford 428 Engine Specs
The 1966 Ford 428 engine was a powerful V8 engine produced by Ford Motor Company. It was part of the FE (Ford-Edsel) engine family and was introduced in 1966 as an upgrade option for various Ford vehicles. Let’s take a closer look at the specifications of this iconic engine.
Engine Configuration
The 1966 Ford 428 engine featured a V8 configuration, meaning it had eight cylinders arranged in a V-shaped pattern. The engine had a displacement of 428 cubic inches, which is equivalent to 7.0 liters. This large displacement allowed for impressive power and performance.
The engine block was made of cast iron, providing durability and strength. It had a bore of 4.13 inches and a stroke of 3.98 inches. The compression ratio of the engine varied depending on the specific model and application, but it typically ranged from 10.5:1 to 11.0:1.
The 428 engine was equipped with a single four-barrel carburetor, which supplied fuel to the engine’s combustion chambers. This carburetor, combined with the engine’s other performance-oriented features, contributed to its impressive power output.
Engine Oil Specs & Service Intervals
Proper engine oil is crucial for the smooth operation and longevity of any engine, including the 1966 Ford 428. Here are the recommended engine oil specifications and service intervals for this engine:
- Engine Oil Type: The recommended engine oil for the 1966 Ford 428 engine is a high-quality, multi-viscosity oil with a viscosity grade of SAE 10W-30. This type of oil provides good lubrication in both cold and hot weather conditions.
- Oil Capacity: The engine oil capacity for the 1966 Ford 428 engine is approximately 5 quarts, including the oil filter.
- Oil Filter: It is essential to use a high-quality oil filter that is compatible with the engine. Consult the vehicle’s manual or a trusted automotive parts store for the correct oil filter for your specific model.
- Service Intervals: Regular oil changes are vital to maintain engine performance and prevent premature wear. It is recommended to change the engine oil and oil filter every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first. However, it is always best to consult the vehicle’s manual for the manufacturer’s recommended service intervals.
By following these engine oil specifications and service intervals, you can ensure that your 1966 Ford 428 engine remains in optimal condition and delivers the performance it was designed for.
Detailed Engine Specifications
| Engine Specifications | Values |
|---|---|
| Engine Type | V8 |
| Displacement | 428 cubic inches (7.0 liters) |
| Engine Block Material | Cast Iron |
| Bore | 4.13 inches |
| Stroke | 3.98 inches |
| Compression Ratio | Varied (typically 10.5:1 to 11.0:1) |
| Carburetor | Single Four-Barrel |
These detailed engine specifications provide a comprehensive overview of the 1966 Ford 428 engine. With its V8 configuration and impressive power output, this engine remains a classic choice for automotive enthusiasts and collectors.
0 Comments