1967 Ford 390 Engine Specs
The 1967 Ford 390 engine was a powerful V8 engine produced by Ford Motor Company. It was part of the FE (Ford-Edsel) engine series and was introduced in 1961. The 390 engine was widely used in various Ford vehicles during the 1960s and early 1970s. Let’s take a closer look at the specifications of this iconic engine.
Engine Configuration
The 1967 Ford 390 engine had a displacement of 390 cubic inches, which is equivalent to 6.4 liters. It featured a V8 configuration with a 90-degree angle between the cylinder banks. The engine block was made of cast iron, providing durability and strength. The 390 engine had a bore of 4.05 inches and a stroke of 3.78 inches.
The cylinder heads of the 390 engine were also made of cast iron and featured a wedge combustion chamber design. The engine had a compression ratio of 10.5:1, allowing for efficient combustion and power delivery. It was equipped with a single 4-barrel carburetor, providing a sufficient amount of fuel to support its performance.
Engine Oil Specs & Service Intervals
Proper engine oil is crucial for the smooth operation and longevity of any engine, including the 1967 Ford 390. Here are the recommended engine oil specifications and service intervals for the 390 engine:
- Engine Oil Type: The 1967 Ford 390 engine requires a high-quality motor oil with a viscosity of SAE 10W-30. This oil provides adequate lubrication and protection for the engine components.
- Oil Capacity: The oil capacity of the 390 engine is approximately 5 quarts, including the oil filter. It is important to check the oil level regularly and maintain it within the recommended range.
- Oil Change Interval: It is recommended to change the engine oil and oil filter every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first. Regular oil changes help remove contaminants and ensure optimal engine performance.
- Oil Filter: When performing an oil change, it is essential to replace the oil filter as well. The 1967 Ford 390 engine uses a spin-on type oil filter, which should be replaced with a compatible filter.
Following the recommended oil specifications and service intervals will help maintain the performance and reliability of the 1967 Ford 390 engine.
| Engine Specifications | Value |
|---|---|
| Displacement | 390 cubic inches (6.4 liters) |
| Configuration | V8 |
| Bore | 4.05 inches |
| Stroke | 3.78 inches |
| Compression Ratio | 10.5:1 |
| Carburetor | Single 4-barrel |
In conclusion, the 1967 Ford 390 engine was a powerful V8 engine that offered impressive performance. Its specifications, including the displacement, configuration, and compression ratio, contributed to its reputation as a reliable and capable engine. Adhering to the recommended engine oil specifications and service intervals is essential for maintaining the longevity and performance of this iconic engine.
0 Comments