1974 Ford 302 Engine Specs
The 1974 Ford 302 engine, also known as the Ford Windsor engine, was a V8 engine produced by Ford Motor Company. It was part of the Ford 90-degree small block V8 engine family and was widely used in various Ford vehicles during the 1970s. Let’s take a closer look at the specifications of this iconic engine.
Engine Configuration
- Engine Type: V8
- Displacement: 5.0 liters (302 cubic inches)
- Block Material: Cast iron
- Head Material: Cast iron
- Valvetrain: Pushrod overhead valve
- Fuel System: Carbureted
Engine Oil Specs & Service Intervals
Proper engine oil specifications and regular maintenance are crucial for the longevity and performance of any engine, including the 1974 Ford 302. Here are the recommended engine oil specifications and service intervals for this engine:
- Engine Oil Type: SAE 10W-30 or SAE 10W-40
- Oil Capacity: Approximately 5 quarts (including oil filter)
- Oil Filter: Replace with every oil change
- Oil Change Interval: Every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first
It’s important to note that these recommendations are general guidelines, and it’s always best to consult the specific owner’s manual or maintenance guide for your vehicle to ensure you’re following the manufacturer’s recommendations.
Detailed Engine Specifications
| Specification | Value |
|---|---|
| Engine Type | V8 |
| Displacement | 5.0 liters (302 cubic inches) |
| Bore x Stroke | 4.00″ x 3.00″ |
| Compression Ratio | 8.0:1 |
| Horsepower | 140-150 hp |
| Torque | 240-245 lb-ft |
| Fuel System | Carbureted |
| Firing Order | 1-5-4-2-6-3-7-8 |
| Ignition Timing | 10-14 degrees BTDC |
These specifications provide a glimpse into the performance capabilities of the 1974 Ford 302 engine. The engine’s power output and torque may vary depending on the specific vehicle and any modifications that have been made over the years.
The 1974 Ford 302 engine holds a special place in automotive history, and its specifications continue to fascinate enthusiasts and collectors alike. Whether you’re restoring a classic Ford vehicle or simply interested in the technical details, understanding the engine’s configuration, oil specifications, and service intervals is essential for proper maintenance and performance.
0 Comments