1983 Ford 460 Engine Specs
The 1983 Ford 460 engine was a powerful V8 engine that was commonly used in a variety of Ford vehicles during that time. Let’s take a closer look at its specifications and features.
Engine Configuration
The 1983 Ford 460 engine was a V8 engine with a displacement of 7.5 liters or 460 cubic inches. It featured an overhead valve (OHV) design with two valves per cylinder. The engine had a cast iron block and cylinder heads, providing durability and strength.
The 460 engine had a bore of 4.36 inches and a stroke of 3.85 inches. It had a compression ratio of 8.0:1, which was relatively low compared to some other engines of that era. The lower compression ratio allowed for the use of regular unleaded gasoline, making it more economical for everyday use.
Engine Oil Specs & Service Intervals
Proper engine oil specifications and regular maintenance are crucial for the longevity and performance of any engine, including the 1983 Ford 460. Here are the recommended engine oil specs and service intervals for the 1983 Ford 460 engine:
- Engine Oil Type: It is recommended to use a high-quality, multi-viscosity engine oil with a viscosity grade of 10W-30 or 10W-40. This ensures proper lubrication and protection for the engine components.
- Oil Capacity: The 1983 Ford 460 engine has an oil capacity of approximately 6 quarts, including the oil filter.
- Oil Change Interval: It is recommended to change the engine oil and oil filter every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first. Regular oil changes help remove contaminants and maintain optimal engine performance.
- Oil Filter: When performing an oil change, it is important to replace the oil filter as well. Use a high-quality oil filter that is compatible with the 1983 Ford 460 engine.
Detailed Engine Specifications
To provide a comprehensive overview of the 1983 Ford 460 engine, here is a detailed specifications chart:
| Engine Type | V8 |
|---|---|
| Displacement | 7.5 liters (460 cubic inches) |
| Engine Configuration | Overhead Valve (OHV) |
| Valvetrain | Two valves per cylinder |
| Block Material | Cast iron |
| Cylinder Head Material | Cast iron |
| Bore | 4.36 inches |
| Stroke | 3.85 inches |
| Compression Ratio | 8.0:1 |
In conclusion, the 1983 Ford 460 engine was a robust V8 engine with a displacement of 7.5 liters. It featured an overhead valve design and had a low compression ratio, allowing for the use of regular unleaded gasoline. Proper engine oil specifications and regular maintenance, including oil changes every 3,000 to 5,000 miles, were essential for maintaining the engine’s performance and longevity.
0 Comments