1992 Ford 5.8 Engine Specs

The 1992 Ford 5.8 engine, also known as the 351 Windsor V8, was a popular choice for various Ford vehicles during its time. This powerful engine offered impressive performance and reliability, making it a favorite among car enthusiasts and truck owners alike. Let’s dive into the detailed specifications of this engine.

Engine Configuration

  • Engine Type: V8
  • Displacement: 5.8 liters (351 cubic inches)
  • Fuel System: Electronic Fuel Injection (EFI)
  • Valvetrain: Overhead Valve (OHV)
  • Number of Valves: 16
  • Bore x Stroke: 4.00 inches x 3.50 inches
  • Compression Ratio: 9.0:1
  • Horsepower: 210 hp @ 3,800 rpm
  • Torque: 315 lb-ft @ 2,800 rpm

The 1992 Ford 5.8 engine featured a V8 configuration, meaning it had eight cylinders arranged in a V-shaped pattern. With a displacement of 5.8 liters or 351 cubic inches, this engine provided ample power for a variety of applications, including trucks, SUVs, and performance cars.

The engine utilized Electronic Fuel Injection (EFI) technology, which improved fuel efficiency and overall performance. The EFI system precisely controlled the fuel delivery to each cylinder, ensuring optimal combustion and power output.

The 5.8 engine employed an Overhead Valve (OHV) valvetrain design. This design places the valves above the combustion chamber, allowing for efficient airflow and improved performance. With 16 valves in total, this engine achieved a good balance between power and fuel economy.

The bore and stroke dimensions of the 1992 Ford 5.8 engine were 4.00 inches and 3.50 inches, respectively. These measurements determine the volume of the combustion chamber and the piston’s travel distance within the cylinder. The compression ratio, which represents the ratio of the cylinder’s volume at the bottom of the piston’s stroke to the volume at the top, was 9.0:1.

  2001 Ford V10 Engine: Specs, Configuration, and Service Intervals

In terms of power output, the 1992 Ford 5.8 engine delivered 210 horsepower at 3,800 rpm. Additionally, it generated a torque of 315 lb-ft at 2,800 rpm. These figures showcased the engine’s ability to provide strong acceleration and towing capabilities.

Engine Oil Specs & Service Intervals

Proper engine oil maintenance is crucial for the longevity and performance of any engine, including the 1992 Ford 5.8. Here are the recommended engine oil specifications and service intervals for this engine:

  • Engine Oil Type: SAE 5W-30
  • Oil Capacity (including filter): 5 quarts
  • Oil Change Interval: Every 3,000 to 5,000 miles or every 3 months

The 1992 Ford 5.8 engine requires the use of SAE 5W-30 engine oil. This oil viscosity provides excellent lubrication and protection across a wide range of temperatures, ensuring optimal engine performance in various weather conditions.

When performing an oil change, it is important to replace the oil filter as well. The total oil capacity, including the filter, is approximately 5 quarts. This ensures that the engine has an adequate supply of fresh oil for proper lubrication.

As for the oil change intervals, it is recommended to change the engine oil every 3,000 to 5,000 miles or every 3 months, whichever comes first. Regular oil changes help remove contaminants and maintain the oil’s effectiveness in protecting the engine’s internal components.

Following these oil specifications and service intervals will help keep the 1992 Ford 5.8 engine running smoothly and extend its lifespan.

Detailed Engine Specifications
Engine Type Displacement Fuel System Valvetrain Number of Valves Bore x Stroke Compression Ratio Horsepower Torque
V8 5.8 liters (351 cubic inches) Electronic Fuel Injection (EFI) Overhead Valve (OHV) 16 4.00 inches x 3.50 inches 9.0:1 210 hp @ 3,800 rpm 315 lb-ft @ 2,800 rpm
  2018 Ford 5.0 Engine: Common Problems and Consequences
Categories: Ford

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *