1996 Ford F350 460 Engine Specs

The 1996 Ford F350 is a powerful truck that was equipped with a 460 cubic inch (7.5-liter) V8 engine. This engine, known as the 460 V8, was one of the largest and most powerful engines available for the F350 during that time. Let’s take a closer look at the engine configuration, oil specifications, and service intervals for this beast of an engine.

Engine Configuration

The 1996 Ford F350’s 460 V8 engine featured a cast-iron block and cylinder heads. It had a bore of 4.36 inches and a stroke of 3.85 inches, resulting in a total displacement of 460 cubic inches. The engine had a compression ratio of 8.4:1 and was equipped with a two-barrel carburetor.

The 460 V8 engine produced an impressive amount of power and torque. It had a horsepower rating of 245 horsepower at 4,000 rpm and a torque rating of 400 lb-ft at 2,000 rpm. This made the F350 a capable truck for towing and hauling heavy loads.

Engine Oil Specs

Using the correct engine oil is crucial for maintaining the performance and longevity of the 1996 Ford F350’s 460 engine. The recommended engine oil for this engine is a high-quality, multi-viscosity oil with a viscosity rating of 10W-30. It is important to use an oil that meets the API (American Petroleum Institute) specification of SJ or higher.

The engine oil capacity for the 1996 Ford F350 with the 460 engine is approximately 6 quarts, including the oil filter. It is always a good practice to check the oil level regularly and top it up if necessary to ensure proper lubrication and cooling of the engine.

  2007 Ford F-150 5.4L Engine Issues and Consequences

Service Intervals

Regular maintenance is essential for keeping the 1996 Ford F350’s 460 engine running smoothly. Here are some recommended service intervals for this engine:

  • Oil Change: It is recommended to change the engine oil and oil filter every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first. Regular oil changes help remove contaminants and keep the engine properly lubricated.
  • Spark Plug Replacement: The spark plugs should be replaced every 30,000 miles or every 2 to 3 years. This ensures proper ignition and combustion in the engine.
  • Air Filter Replacement: The air filter should be inspected and replaced if necessary every 12,000 to 15,000 miles or once a year. A clean air filter improves engine performance and fuel efficiency.
  • Fuel Filter Replacement: The fuel filter should be replaced every 15,000 to 30,000 miles or every 2 to 3 years. A clean fuel filter helps prevent fuel system issues and maintains optimal engine performance.
  • Timing Belt Replacement: The 1996 Ford F350’s 460 engine is equipped with a timing chain, which does not require regular replacement like a timing belt. However, it is important to inspect the timing chain for any signs of wear or damage during routine maintenance.

Detailed Engine Specifications

Engine 1996 Ford F350 460 V8
Engine Type V8
Displacement 460 cubic inches (7.5 liters)
Block Material Cast Iron
Cylinder Head Material Cast Iron
Bore 4.36 inches
Stroke 3.85 inches
Compression Ratio 8.4:1
Carburetor Two-Barrel
Horsepower 245 hp @ 4,000 rpm
Torque 400 lb-ft @ 2,000 rpm

The 1996 Ford F350’s 460 engine was a true powerhouse, providing ample power and torque for heavy-duty tasks. By following the recommended engine oil specifications and service intervals, owners can ensure that this engine continues to perform at its best for years to come.

  Ford 308 Engine: Specs, Configuration, Oil, and Service Intervals
Categories: Ford

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *