2008 Ford Ranger 2.3 Engine Specs
The 2008 Ford Ranger is a compact pickup truck that offers a reliable and efficient 2.3-liter engine. Let’s take a closer look at the engine specifications, configuration, as well as the engine oil specs and service intervals for this model.
Engine Configuration
The 2008 Ford Ranger comes equipped with a 2.3-liter inline-four engine. This engine is known for its durability and fuel efficiency. It features a cast iron block and aluminum cylinder head, providing a good balance between strength and weight.
The engine is equipped with a double overhead camshaft (DOHC) configuration, which helps improve power delivery and overall performance. The DOHC design allows for better control of the intake and exhaust valves, resulting in improved efficiency and power output.
Engine Oil Specs & Service Intervals
Proper engine oil maintenance is crucial for the longevity and performance of any vehicle. Here are the engine oil specifications and recommended service intervals for the 2008 Ford Ranger 2.3 engine:
- Engine Oil Type: The recommended engine oil for the 2008 Ford Ranger 2.3 engine is a high-quality synthetic or conventional oil with a viscosity of 5W-30.
- Oil Capacity: The engine oil capacity for this model is approximately 5 quarts (including the oil filter).
- Oil Filter: It is important to use a high-quality oil filter that is compatible with the 2.3 engine. Consult the vehicle’s manual or a trusted mechanic for the recommended oil filter brand.
Service Intervals
To ensure optimal engine performance and longevity, it is important to follow the recommended service intervals for oil changes. Here are the general guidelines for oil change intervals for the 2008 Ford Ranger 2.3 engine:
- Normal Driving Conditions: For vehicles operating under normal driving conditions, it is recommended to change the engine oil and filter every 5,000 to 7,500 miles or every 6 months, whichever comes first.
- Severe Driving Conditions: If your driving conditions are considered severe, such as frequent towing, driving in extreme temperatures, or dusty environments, it is recommended to change the oil and filter every 3,000 to 5,000 miles or every 3 months, whichever comes first.
It is important to note that these are general guidelines, and it is always best to consult the vehicle’s manual or a trusted mechanic for the specific service intervals based on your driving habits and conditions.
Detailed Engine Specifications
To provide a comprehensive overview of the 2008 Ford Ranger 2.3 engine, here are the detailed specifications:
| Engine Type | 2.3-liter Inline-Four |
|---|---|
| Engine Code | Unknown |
| Valvetrain | Double Overhead Camshaft (DOHC) |
| Displacement | 2.3 liters (2,290 cc) |
| Bore x Stroke | Unknown |
| Compression Ratio | Unknown |
| Horsepower | 143 hp |
| Torque | 154 lb-ft |
| Fuel System | Sequential Multi-Port Fuel Injection |
| Fuel Type | Regular Unleaded |
| Recommended Fuel | Unknown |
| Engine Oil Capacity | Approximately 5 quarts (including filter) |
Please note that some specifications may vary depending on the specific trim level and options of the 2008 Ford Ranger. It is always best to refer to the vehicle’s manual or consult a trusted source for the most accurate and up-to-date information.
In conclusion, the 2008 Ford Ranger 2.3 engine offers a reliable and efficient powertrain for this compact pickup truck. By following the recommended engine oil specifications and service intervals, you can ensure optimal performance and longevity for your vehicle.
0 Comments