Ford 134 Engine Specs

The Ford 134 engine is a compact and reliable powerplant that has been used in various Ford vehicles over the years. Let’s take a closer look at its specifications to understand its capabilities.

Engine Configuration

The Ford 134 engine is a four-cylinder, inline configuration engine. It features a cast-iron block and cylinder head, providing durability and strength. The engine has a displacement of 2.2 liters or 134 cubic inches, hence its name.

The engine is equipped with an overhead valve (OHV) design, which means the valves are located in the cylinder head and are operated by pushrods and rocker arms. This configuration allows for efficient combustion and better power delivery.

Engine Oil Specs

Choosing the right engine oil is crucial for the performance and longevity of the Ford 134 engine. Here are the recommended specifications:

  • Oil Type: It is recommended to use a high-quality, multi-viscosity engine oil with a viscosity grade of 10W-30 or 10W-40. This ensures proper lubrication in various operating conditions.
  • Oil Capacity: The Ford 134 engine has an oil capacity of approximately 4.5 quarts. It is important not to overfill or underfill the engine oil to maintain optimal performance.
  • Oil Filter: Always use a high-quality oil filter that is compatible with the Ford 134 engine. This helps to remove contaminants and keep the oil clean.

Service Intervals

Regular maintenance is essential to keep the Ford 134 engine running smoothly. Here are the recommended service intervals:

  • Oil Change: It is recommended to change the engine oil and oil filter every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first. This interval may vary depending on driving conditions and oil quality.
  • Spark Plug Replacement: The spark plugs should be replaced every 30,000 to 50,000 miles. This ensures proper ignition and fuel efficiency.
  • Air Filter Replacement: The air filter should be inspected regularly and replaced every 12,000 to 15,000 miles or as needed. A clean air filter promotes better engine performance and fuel economy.
  • Timing Belt Replacement: The timing belt should be replaced according to the manufacturer’s recommended interval, typically between 60,000 to 100,000 miles. A worn-out timing belt can lead to engine damage if not replaced in time.
  Ford 361 Engine: Specs, Configuration, and Service Intervals

Detailed Engine Specifications

Here is a detailed chart outlining the specifications of the Ford 134 engine:

Engine Type Four-cylinder, inline
Displacement 2.2 liters (134 cubic inches)
Engine Block Material Cast iron
Cylinder Head Material Cast iron
Valvetrain Overhead valve (OHV)
Oil Type 10W-30 or 10W-40
Oil Capacity Approximately 4.5 quarts
Recommended Oil Filter High-quality, compatible filter

Remember to consult your vehicle’s owner manual or a certified Ford technician for specific information and recommendations regarding your Ford 134 engine.

Categories: Ford

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *