Ford 462 Engine Specs
The Ford 462 engine, also known as the MEL (Mercury-Edsel-Lincoln) engine, was a V8 engine produced by Ford Motor Company from 1958 to 1968. It was primarily used in full-size Ford, Mercury, and Lincoln vehicles during that time. Let’s take a closer look at the engine configuration, oil specifications, and service intervals for the Ford 462 engine.
Engine Configuration
The Ford 462 engine had a displacement of 7.6 liters or 462 cubic inches, hence the name. It featured a V8 configuration with a 90-degree angle between the cylinder banks. The engine had a cast-iron block and cylinder heads, providing durability and strength. It also had a single camshaft located in the center of the engine block, operating the overhead valves through pushrods and rocker arms.
The Ford 462 engine utilized a carburetor as its fuel delivery system. It had a bore and stroke of 4.38 inches and 3.85 inches, respectively. The compression ratio of the engine varied depending on the specific model and year, ranging from 9.0:1 to 10.5:1.
Engine Oil Specs
When it comes to engine oil specifications for the Ford 462 engine, it is essential to use the recommended oil to ensure optimal performance and longevity. The engine oil should meet the following specifications:
- Oil Type: SAE 10W-30 or SAE 10W-40
- API (American Petroleum Institute) Service Classification: SG or higher
- Oil Capacity: Approximately 5 quarts (varies depending on the specific model and year)
It is crucial to check the owner’s manual or consult with a trusted mechanic to confirm the exact oil specifications for your Ford 462 engine, as they may vary slightly depending on the specific vehicle model and year.
Service Intervals
Regular maintenance and service intervals are vital to keep the Ford 462 engine running smoothly and efficiently. Here are some general guidelines for service intervals:
- Oil Change: It is recommended to change the engine oil and oil filter every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first.
- Spark Plugs: The spark plugs should be inspected and replaced if necessary every 30,000 to 45,000 miles or every 3 to 5 years.
- Air Filter: The air filter should be checked and replaced if dirty or clogged every 15,000 to 30,000 miles or every 1 to 2 years.
- Cooling System: The cooling system should be flushed and refilled with fresh coolant every 2 to 3 years or as recommended by the manufacturer.
These service intervals are general recommendations, and it is always best to consult the owner’s manual or seek advice from a qualified mechanic for the specific maintenance schedule for your Ford 462 engine.
Detailed Engine Specifications
| Engine | Specification |
|---|---|
| Displacement | 7.6 liters or 462 cubic inches |
| Configuration | V8 |
| Block Material | Cast Iron |
| Cylinder Head Material | Cast Iron |
| Camshaft | Single camshaft located in the center of the engine block |
| Fuel System | Carburetor |
| Bore | 4.38 inches |
| Stroke | 3.85 inches |
| Compression Ratio | Varied from 9.0:1 to 10.5:1 |
The Ford 462 engine was a powerful and reliable V8 engine that provided ample performance for the full-size Ford, Mercury, and Lincoln vehicles of its time. By following the recommended engine oil specifications and service intervals, you can ensure that your Ford 462 engine continues to perform at its best for years to come.
0 Comments