Honda K24A2 Engine Specs
The Honda K24A2 engine is a four-cylinder, inline, gasoline engine that belongs to the K-series family of engines produced by Honda. It is known for its reliability, performance, and efficiency, making it a popular choice among car enthusiasts and everyday drivers alike. Let’s take a closer look at the engine specifications of the Honda K24A2.
Engine Configuration
The Honda K24A2 engine features a displacement of 2.4 liters, or 2,354 cubic centimeters (cc). It has a bore of 87 mm and a stroke of 99 mm. The engine is equipped with a dual overhead camshaft (DOHC) configuration, which means it has two camshafts per cylinder bank. This configuration allows for better control of valve timing and improved engine performance.
The K24A2 engine also incorporates Honda’s i-VTEC technology, which stands for Intelligent Variable Valve Timing and Lift Electronic Control. This technology optimizes valve timing and lift for both low-end torque and high-end power, resulting in improved fuel efficiency and performance across a wide range of engine speeds.
Engine Oil Specs & Service Intervals
Proper engine oil is crucial for maintaining the performance and longevity of the Honda K24A2 engine. Here are the recommended engine oil specifications and service intervals for this engine:
- Engine Oil Type: Honda recommends using 5W-30 synthetic engine oil that meets the Honda HTO-06 specification. Synthetic oil provides better lubrication and thermal stability, especially under high engine loads and extreme temperatures.
- Oil Capacity: The K24A2 engine has an oil capacity of approximately 4.5 liters (4.8 quarts) when the oil filter is also changed.
- Service Intervals: Honda recommends changing the engine oil and oil filter every 7,500 miles or 12 months, whichever comes first. However, it is always a good idea to consult your vehicle’s owner’s manual for the manufacturer’s specific recommendations.
Regular oil changes are essential to keep the engine running smoothly and to prevent premature wear and damage. It is also important to use high-quality oil filters that meet or exceed the manufacturer’s specifications to ensure proper filtration and protection against contaminants.
Detailed Engine Specifications
| Engine Type | Inline 4-cylinder |
|---|---|
| Displacement | 2.4 liters (2,354 cc) |
| Bore | 87 mm |
| Stroke | 99 mm |
| Valvetrain | DOHC, i-VTEC |
| Compression Ratio | 10.5:1 |
| Power Output | 200 horsepower @ 7,000 rpm |
| Torque | 166 lb-ft @ 4,500 rpm |
The Honda K24A2 engine delivers a power output of 200 horsepower at 7,000 rpm and a torque of 166 lb-ft at 4,500 rpm. These specifications provide a balance between performance and fuel efficiency, making it suitable for a wide range of applications.
In conclusion, the Honda K24A2 engine is a reliable and efficient powerplant that offers impressive performance. With its advanced engine configuration, i-VTEC technology, and proper maintenance, this engine can provide a smooth and enjoyable driving experience for years to come.
0 Comments