Volvo B230F Engine Specifications
The Volvo B230F engine is a well-regarded powerplant that has been utilized in various Volvo models throughout the 1980s and 1990s. Renowned for its durability and efficiency, the B230F features a range of specifications that make it a popular choice among enthusiasts and mechanics alike.
Engine Overview
The B230F is a 2.3-liter inline-four engine that employs a variety of technologies to enhance performance and efficiency. Below is a detailed specification chart for the B230F engine.
| Specification | Details |
|---|---|
| Engine Type | Inline-4 |
| Displacement | 2.3 liters (2316 cc) |
| Bore x Stroke | 88 mm x 90 mm |
| Compression Ratio | 9.8:1 |
| Fuel System | Multi-Point Fuel Injection (MPFI) |
| Maximum Power | 116 hp (86 kW) at 5,500 rpm |
| Maximum Torque | 136 lb-ft (185 Nm) at 3,000 rpm |
| Engine Weight | Approximately 130 kg (287 lbs) |
| Fuel Type | Regular Unleaded |
Engine Configuration
The B230F engine is designed with a robust configuration that promotes longevity and reliability. Below are key aspects of its configuration:
Key Features
- Inline-4 Design: The engine’s inline configuration allows for a compact design, contributing to improved weight distribution and handling.
- Aluminum Cylinder Head: The use of aluminum helps reduce weight while enhancing thermal efficiency.
- DOHC (Dual Overhead Camshafts): This design allows for better airflow and improved performance at higher RPMs.
- Multi-Point Fuel Injection: The MPFI system optimizes fuel delivery, improving fuel efficiency and reducing emissions.
- Cast Iron Block: The engine block is made from cast iron, providing strength and durability.
Performance Characteristics
The B230F engine is known for its balanced performance, making it suitable for various driving conditions. Key performance characteristics include:
- Responsive acceleration due to the engine’s torque curve.
- Good fuel economy for a vehicle of its size and power output.
- Low emissions, thanks to the efficient fuel injection system.
Engine Oil Specifications
Proper maintenance of the B230F engine includes using the correct engine oil. The specifications for engine oil are crucial for ensuring optimal performance and longevity.
Oil Type and Viscosity
The recommended engine oil for the B230F engine is as follows:
| Specification | Details |
|---|---|
| Oil Type | Synthetic or Conventional |
| Viscosity Rating | 10W-30 or 15W-40 |
Oil Capacity
The oil capacity for the B230F engine is approximately 4.5 liters (4.8 quarts) when including the oil filter.
Service Intervals
Regular maintenance is essential for the longevity of the B230F engine. Below are the recommended service intervals for oil changes and other maintenance tasks.
Oil Change Intervals
- Every 5,000 to 7,500 miles (8,000 to 12,000 km) for conventional oil.
- Every 7,500 to 10,000 miles (12,000 to 16,000 km) for synthetic oil.
Other Maintenance Tasks
In addition to regular oil changes, the following maintenance tasks should be performed at specified intervals:
- Air Filter Replacement: Every 15,000 miles (24,000 km).
- Fuel Filter Replacement: Every 30,000 miles (48,000 km).
- Spark Plug Replacement: Every 30,000 miles (48,000 km).
- Timing Belt Replacement: Every 60,000 miles (96,000 km).
- Coolant Flush: Every 30,000 miles (48,000 km) or as needed.
Conclusion
The Volvo B230F engine is a testament to Volvo’s commitment to engineering excellence. With its robust specifications, efficient design, and well-defined maintenance intervals, it remains a popular choice for both daily drivers and classic car enthusiasts. Proper care and adherence to service intervals will ensure that this engine continues to perform reliably for years to come.
0 Comments